How To: Make a collapsible basket with a scrollsaw
In this two-part tutorial from the Scrollsaw Workshop, Steve Good demonstrates how to create a collapsible basket with a scrollsaw. As always, the pattern is available through Steve's blog, scrollsawworkshop.blogspot.com. Make your own collapsible basket with this great scrollsaw tutorial.
How To: Install the moisture barrier over concrete subfloor
This video describes the process of installing a moisture barrier over a concrete subfloor. The presenter is using 6 mil thick poly barrier. The barrier comes in rolls about twenty-four inches wide. When rolling out the moisture barrier you want to go from wall to wall and cover the entire floor. For optimal moisture control you will want to overlap the poly barrier by at least six inches. The barrier plastic does not need to be taped or secured to the floor at all, it simply lays on top of t...
Creator Spotlight: Matthias Wandel, Prolific Woodworking Machinist
You've seen his explanation of a combination lock's inner workings. You'll never lose another game of Jenga, thanks to his winning wooden pistol. And nearly 4 million YouTube users have marveled at his wooden marble machine sculpture. He's Matthias Wandel, and he's accomplished what most only dream of—turning a hobby into a career. Matthias has been tinkering in woodworking since he was a child, with unrestricted access to his father's workshop, permitted to use power tools unsupervised from ...
How To: Repair an Old Wooden Chair
Unscrew chair and knock apart gently with a rubber mallet. To fix a broken stretch, use quick dry polyurethane glue, using plenty (better to have too much than too little)
How To: Bend Plywood Strips with Glue and Clamps for a Curved Look
You may know how to cut and sand plywood, but bending it is a totally different skill set you need to master, but this woodworking how-to will show you the right moves in seven easy steps. In the video, a bend is being applied to plywood for a curved chair leg, but this method could be used for any kind of plywood bends.
How To: Build a beautiful cedar log bench using a chainsaw
For the normal woodworker at home, the table saw, router and lathe are the prime tools used for making fine furniture, but when you hit the outdoors, the backwoodsman's tool of trade is the chainsaw. Mastering furniture-making with a chainsaw is the key to being a great woodworker, and in this three-part video, you'll learn the techniques to chainsawing your way to a beautiful log bench.
How To: Get a nice, even stain on wood
You will learn how to get a nice, even stain on wood in this Home and Garden video tutorial brought to you by TheSoapGuy. It’s really easy and simple to do. Get a finished piece of wood. You should work in a well ventilated area because wood stain generates a lot of fumes. Wood stain comes in aerosol spray and in cans. Mix the stain in the can by rolling the can. Don’t shake it, it will generate bubbles. Open the can and apply the wood stain with a brush evenly on the surface. The more coats ...
How To: Use a nail set & punch for woodworking
Bob Schmidt teaches us how to use a nail set & punch for woodworking. A nail set is a traditional kit that you can find anywhere. The nail set punch does not require a hammer to use and is very easy to figure out. Place this on a nail and then pull the spring back. Keep the pressure towards the nail head and it will drive the nail right into the hole that you need it to go in. This is great if you have a nail that needs to go into the wall but the hammer will not fit where you need it to. Any...
How To: Make a magic wooden disappearing box
The wooden magic disappearing box is a great project to work on if you are great at woodworking, this can be a great gift for someone or a great addition for your next magic trick. When working with wood and making specific sized cuts, it is important to measure as closely as you can.
How To: Install the last row without a pull bar
When you end your last row, there are occasions where you can't use a pull bar. The alternative to using a pull bar is to modify the groove side of the plank that's on the floor. Shave the groove and remove the debris, making sure that there's none in the track. Next, take a small bead of glue and run it down the groove side of your plank. Engage the next plank as close as you can get. Set the plank in place with the pull bar. Finally, tape the plank to its neighbor to secure it until the glu...
How To: Use the space above a garage door with a storage rack
Danny Lipford shows you how to utilize the space above your garage door. Just watch this video tutorial to see how to use the space above a garage door with a storage rack.
How To: Remove Watermarks from Wooden Surfaces
Everyone has those watermarks when you forgot to use a coaster but the solution is easy!! Here is a little step by step guide and a little video that might help - let me know what you think!
How To: Build a Passive Solar Garage Door and Keep Your Garage Warm During Winter
I hate being cold. That's why I live in Los Angeles. But, there are plenty of folks who are experiencing some pretty chilly temperatures this year, despite global warming, and one of the worst places affected is the garage. C'mon, who has a freakin' heater in their garage?
How To: Make your very own Connect-Four game with wood
In this next woodworking tutorial, you'll find out how to make a favorite game using, of course, wood!
How To: Install Dry Core basement sub floor
First, the plywood or oriented strand board (OSB) subfloor floats on a corrugated or “cleated” waterproof underlayment, so the wood never actually touches the floor. The underlayment material can be made of Styrofoam or heavy-duty polyethylene, the same material used in corrugated plastic drain pipe (one of the toughest plastics available). This underlayment creates an air gap above the concrete. Combined with the wooden panels, the air in this space provides a thermal break that acts as insu...
How To: Undercut the door casing
This video demonstrates the proper technique for undercutting the door casing or the molding around the door. You will need to do this when you are laying a laminate floor, otherwise the laminate flooring will not seat underneath the door casing correctly. The first step is to figure out how much you will need to cut out of the door casing. This can be accomplished by measuring the thickness of the laminate flooring plus any underlay you may be using. The presenter demonstrates this with a po...
How To: Install quarter round
This video will be a very quick, simple, and easy way to install your quarter round. To start you will see that instead of cutting a 45 degree corner, it was left flush. With the other piece you will cut a cove in it and then align it on top of the other piece at the corner of the wall. This method allows the pieces to fit, regardless of the irregularities in the wall (if any). To finish it up take the return and just apply enough glue to attach it to the end of the first piece. There it is -...
How To: Lash a bamboo trellis
This video has some great techniques for holding bamboo pieces together. Lashing is both strong and attractive, and all you need for each joint is a piece of waxed lashing cord 4 to 5 feet long.
How To: Fix a drawer that sticks
Don't let that stuck drawer aggravate you on a daily basis; find the problem and fix it once and for all.
How To: Wax your jigs
Shopsmith Academy shows you how to use paste wax to wax your jigs. Apply this lesson to your next woodworking project and maintain your tools. Watch this video for useful woodworking tips. Search Shopsmith Academy on WonderHowTo for more woodworking videos.
How To: Carve a teeny wooden mouse
Whittling seems hard, but not with this video tutorial... watch to learn how to carve a teeny wooden mouse with a small knife, sander and drill.
How To: Cut a hollow vase with a scroll saw
In this two-part tutorial series from the Scrollsaw Workshop, Steve Good walks you through the process of creating a hollow vase entirely without a lathe. As always, the pattern is available, free of charge, through Steve's blog, scrollsawworkshop.blogspot.com.
How To: Make a sharpening jig set up for bowl gouges
This instructional woodworking video to make a wooden jig for sharpening gouge tools on a grinding wheel. These sharpening jigs give consistent grinds. The jig makes sharpening a gouge almost foolproof so you can get back to wood turning.
How To: Build an Outfeed Table for a Table Saw
An outfeed table is a device to catch the workpiece after it's been machined. This how to video shows you how you can build an outfeed table for your tablesaw.
How To: Remove finish nails from wood without damaging it
Tim Carter, of Ask the Builder, demonstrates three easy ways to remove nails from pieces of wood, like trim or baseboards, so they can be reused in future home projects.
News: These Beautiful Chairs Are Grown, Not Made
For anyone who has spent an entire afternoon attempting to assemble a set of IKEA chairs, these wooden masterpieces probably seem pretty appealing.
News: This High Voltage Furniture Technique Burns Lightning Designs into Wood
Lightning is scary and powerful, yet when harnessed correctly, it can become a beautiful pattern for hand-crafted wooden furniture. Muchd like Zeus in ancient mythology, Canadian Woodworks is harnessing the power and beauty of lightning, but they're doing it for aesthetic purposes.
News: The Slatted, Morphing 'Wave' Cabinet Opens Up Like a Paper Fan
If you're looking to mix up your home décor with something a little bit outside the traditional cabinet box set, check out the amazing Wave cabinet from NYC-based, Chilean designer Sebastian Errazuriz. This revolutionary design will change the way you think about interior decoration and furniture functionality.
How To: Faux Ebonise Wood
If you have some worn scuffed wood and want to give it a little bit of life. These steps might help you to ebonise, taking half the time!!
How To: Remove a Scratch from an Antique Table
Hi everyone, I have been working on some videos and tips about restoring antique furniture, in this tutorial, I will be showing you how to remove a scratch from a wooden table.
How To: Make a Garden Trug
This is a simple design built from reclaimed wood and purchased ¼” wood slats. It cost very little and only took a couple of hours to complete the build. The goal was light weight, shallow and wide for collecting leafy vegetables, easy to handle and somewhat attractive.
How To: Make a Scroll Saw Pattern
This method can be used on any kind of scroll saw pattern. Animals, people, inanimate objects, etc. Done on paper and scanned onto my computer only to clean them up and color them in to display. Three part series.
How To: Make a Portrait Scroll Saw Pattern
I do mine on paper and in these two videos I will show you how to do them. Doesn't involve a computer unless you want to clean them up and color them in to show others.
How To: Make a Vase from a Slab of Wood Using a Scroll Saw
The video link included shows in text how I do it from start to finish. The description tells a little more. This particular vase is made of Aromatic Cedar and is 10 inches around.
How To: Build a Puzzle Box
Watch the video and animation for to see how it works. The drawing(free PDF download) is included in the description of the videos.
How To: This DIY Burger King "Fly-Thru" Dishes Out Fast Food for the Birds
As our society and population grows, more developments such as housing and restaurants are built. While this is beneficial for us, it's not so great for the environment and the animals that occupy it. Some of the victims of our prosperity have been the birds, forced from their natural habitats.
How To: These Google Maps Birdhouses Make It Easy for Birds to Find Their Way Home
With Google Maps, we can fly from Los Angeles to Tokyo to Paris and New York—all in a matter of seconds. We can zoom in with relative ease and flock around the city of our choice, checking out restaurants, historical landmarks, traffic and scuba divers. Easily the most recognizable and iconic part of Google Maps are the markers that signify all of these locations and point of interests. The iconic markers have already spurred artists to create Google Map inspired art pieces—with one such arti...
How To: Make a Super Cheap Coffee-Stained Wood Pallet Coffee Table
Turning unused items into usable pieces of furniture is a great way to save money and create some really good-looking pieces for your room. And nothing beats repurposing old wooden pallets. Redditor BaconStripsandFishin used old wooden pallets and a month's worth of coffee to create his own unique coffee table. To make this, unscrewed all of the wooden panels (top and bottom), placed them all together, and then screwed them back in reusing those same nails. Once he had all of the board togeth...
Quick Tip: Fix a Stripped Screw Hole in Five Minutes with Toothpicks
There's nothing that halts progress on a DIY project like a stripped screw. It's incredibly frustrating to get out, and that's just the beginning of your problems. Once it's out, you might also have to fix the hole if you want to use it for anything else. There are tons of ways to do this, but if you're looking for something quick and simple, Chris over on Man Made DIY has you covered.
How To: Take Perfect Pictures of Your Handmade Projects
In order to take the perfect picture of your handmade wooden project, it's helpful to have a lightbox that's similar to what professionals use but definitely cheaper to make yourself.
Next Page
Prev Page